The Point Of The Installation Of BIPV System
Nov 02, 2021
The basic principles of BIPV architectural design: practical, economical, green and beautiful
The basic elements of architecture:
Building function: refers to the use requirements that the building must meet in material and spiritual terms.
Construction technology: including building material technology, structure technology, and construction technology.
Architectural image: It is a comprehensive manifestation of function and technology.
Wall-mounted installation forms and main points:
Avoid light and sight obstacles. The design of the photovoltaic module wall and photovoltaic curtain wall should avoid the line of sight or increase the light transmittance method to fully meet the requirements of not affecting the indoor lighting and visual field. At the same time, module power generation should be avoided. The heat generated at this time will affect the indoor temperature environment.
Leave a proper gap with the main building.
Block the direct sunlight to the wall and reduce the wall temperature: form a ventilated wall to reduce the temperature of the components and the wall. Breathing curtain wall matches the working conditions of photovoltaic modules.
Installation forms and main points of other parts:
Should meet lighting and ventilation requirements. Light-transmitting components should be used, and battery components that block the line of sight must not be used. At the same time, the impact of battery heat dissipation on the indoor environment must also be considered.
Meet the requirements of protection height and thrust resistance of building balcony railings; take necessary protective measures to avoid direct contact with photovoltaic modules.
Use the change of the sun's height to reasonably determine the shape of the sunshade components, so that the mailbox can block the sun in summer and shine the sun into the room in winter.
There should be a good waterproof and drainage structure to avoid accumulation of water and dust. As the entrance awning, it should also have corresponding strength to prevent damage and danger caused by falling objects.
