Galvanized Steel Solar Mounting System

HDG steel ground mounting structures, namely hot-dip galvanized steel ground mounting structures, are often used in the solar photovoltaic field. The specific introduction is as follows:

Material Composition

Main Material: It mainly uses hot-dip galvanized steel, such as Q235B steel after hot-dip galvanizing treatment. Hot-dip galvanizing can form a uniform and strongly adhesive alloy layer on the surface of the steel, effectively preventing the steel from corrosion and rust, and prolonging its service life.

Galvanizing Thickness: Generally, the thickness of the zinc layer is 60 - 80μm, and some manufacturers can ensure it is more than 80μm.

Structural Characteristics

Diverse Foundations: According to different geological conditions, ground pile screws, concrete foundations, C-shaped or H-shaped steel piles, etc. can be selected as the foundation.

Adjustable Angle: The installation angle can usually be adjusted within the range of 0 - 60 degrees as needed, which can better adapt to different lighting conditions and site requirements.

Strong Module Compatibility: It is suitable for various types of solar photovoltaic modules, including framed or frameless, crystalline or thin-film modules. The module arrangement can be vertical or horizontal.

Performance Advantages

Strong Corrosion Resistance: The hot-dip galvanizing treatment gives the product excellent corrosion and rust resistance. It can resist harsh outdoor environments, such as rain, snow, acid and alkali erosion, and can maintain stable performance in complex environments such as deserts and seashores.

Excellent Mechanical Properties: It has high strength and stiffness and can pass safety tests by mechanical calculation and simulation software. It can withstand large wind and snow loads. For example, it can withstand a wind speed of 88m/s and a snow load of 2.0kN/㎡.

Good Economy: The product has a long service life of at least 25 years, reducing the replacement cost. At the same time, the system has relatively few components and is convenient and fast to install, which can reduce the installation cost and time cost.